SolarEdge RS485 Plug-in

The beautifully shaped device for failure and yield monitoring with a TFT color touch screen and a smaller LCD display. Plant size Solar-Log 1200 is compatible with all current inverters. It is possible to connect several inverters for maximum of two manufacturers and a total plant power of 100 kWp. Functions Solar-Log™ Easy Installation The installation and initial setup is automatic. The inverter detection and the Internet logon start immediately. The installation status is shown on the LCD Display. The manual configuration of the Solar-Log™ can be performed via the WEB interface. Easy Installation is compatible with the Solar-Log™ WEB “Commercial Edition” and “Classic 2nd Edition”. Smart Energy Self-consumption can be measured and displayed as a graph with a energy meter. Smart Energy logics activate and deactive individual appliances depending on the amount available energy. Display Options TFT-Touch-Display and access to Solar-Log™ The Solar-Log™ can be operated from a computer with a web browser or directly via the device’s TFT-Touch-Display. The graphical reports of yield data are visualized on the color TFT-Touch-Display and via the web browser. Remote access is possible with the Solar-Log™ WEB “Commercial Edition”. Inverters Number of inverters / devices: just one manufacturer per bus, total maximum 100 inverter / devices, maximum plant size 100 kWp. Inverter interface Inverters can be connected via an RS485/422 and a RS485 interface or an Ethernet connection. Note: There is a temporary firmware issue causing the Huawei quad trackers to not be compatible with the Solar-Log monitoring range.

The new revolutionary Solar-Log™ generation combines smart functionality with greater flexibility for more efficient control, management and monitoring of PV plants. For you, this means:

The ideal solution for the expansion of existing PV systems that already use RS485 communication. The RS485 interface can be

To be used in conjunction with the Solis DLB data logging box. This pre-made wiring loom allows for connection of up to 3 Solis inverters using COM1 (Green) plug to one Data Logging Box . (Can also be used for connecting two inverters.) Ideal for connecting inverters together.